HUMS Hospital

more than 200 characters is not allowed to save. able to save below 200 character.

ABle to add more than 200 characters. issue resolved in qa

Unable to add more than 200 character.

Unable to add more than 200 character.

issue persist on HUMS_Sandbox

Hi @Rupali, please increase character limit from UI for this point, the db side has already been done, thank you.
After that, if print is having any issues, please assign to Rushikesh to assist, thanks

Tested in HUMS_Sandbox, In the Comment Box allows more than 25 characters, It should allow only 25 characters

Tested in humssbx, Working fine

Update Below: VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

Step to Reproduce:
11. Register a patient and order FBC and Lithium
2. Go to the Sample Taking screen, select the test request, click tick, and click Save.
3. Go to the Central Receiving screen, select the test, and click Save.
4. Navigate to Sample/Result Management > Sample Processing, select the test, and click tick to receive the sample.
5. Navigate to Sample/Result Management > Result Entry, select the test, and click the link in the sample details column.
6. Enter the result with comment that not more than 25 characters. Enter the comment (at the bottom, beside the method dropdown. Comments can enter more than 200 characters). Then click submit icon
7. Navigate to Sample/Result Management > Result Validation, select the patient, and click the link in the sample details column.
8. Verify the result details, click Submit, and repeat the same verification step in the Result Approval screen (if applicable based on master setup).
9. Navigate to the Reports menu, select the patient, click the blue print button, and enter the passcode. The comments should appear with the same data enter and correct position.
10. Repeat the same step for Lithium test

Result Testing:

FBC:
Result Entry:

Output:

Attached the detail testing in the PDF document.

Result: The position and data of the both comment appear correctly in output. - Pass